Pre treatment of cooling water system is necessary to maximize the service life of heat exchange equipment
Precleaning - to remove the accumulation of forign matter (grease, oil, corrosion products, mill scale and dust)
Passivation or Pre Filming - to promote rapid formation of an inhibiting film.
Our expert will design Pre treatment and passivation program based on Economics, discharge limitations, and time
requirement.
| Online & Offline Cleaning Programme based on | Additional Range: |
|---|---|
| Inhibited Acid base Descalents / Silicate Scale Removal | Corrosion Inhibitor for DG set radiator |
| Alkaline Base Descalent | Corrosion Inhibitor for specific application. |
| Acid Inhibitors-for 1) Different metals 2) Different acids | Corrosion inhibitor for yellow metal. |
The boiler, steam generating unit, is the core of an industrial process or power industry. Necessity for maximum operating efficacy, optimal fuel and water consumption have added new dimensions and challenges to modern boiler water treatment solutions. Managing the feed, boiler and condensate water with the right water treatment chemicals will ascertain extended life of both boiler and associated equipment and effectively control Corrosion, Scaling and Fouling.
Accelerated Usage of Untreated feed water to reverse osmosis systems can result in scaling and fouling on membrane surface. Consequently, this reduces through put, impacts membrane performance and calls for unwarranted down time and membrane cleaning.
Chemetreat’s custom – made cooling water programs mitigate the impact of corrosion, scaling and fouling in Closed and Open loop systems. Our technical experts provide solutions, trouble shoot, evaluate chemical programs and align their goals to reduce water foot print, optimize heat transfer and achieve overall saving in operating cost.
Water, a valuable natural resource, plays vital role in day to day life and industrial water treatment operations. Our water and waste water chemical solutions are specifically aimed to meet the challenges of influent and effluent water in industrial, municipal and institutional segments. Chemesys manufactures an extensive range of polyelectrolytes (coagulants and flocculants) both liquid and dry powder. We offer low, medium and high molecular weight cationic, anionic and non- ionic polyelectrolytes.
Sooting (Fouling), clinkering and other combustion deposits are common fireside occurrences in boilers and thermic fluid heaters. These deposits along with un-burnt carbon result in the formation of incombustible solids on the heat transfer surfaces, resulting in poor heat transfer, reduced overall boiler efficiency, and increase in fuel consumption. CHEMEFUEL provides series of fuel and firreside additives for liquid and solid fuel fired boilers where the impact of clinker formation can result in frequent cleaning, increased down time and increase in specific fuel consumption. CHEMEFUEL range of liquid fuel additives are designed to condition fuel for better performance and operation of the systems. CHEMEFUEL series of fireside additives are designed for solid fuel fired boilers and heaters including biomass. CHEMEFUEL series of fuel and fireside additives are balanced formulation of combustion catalysts, dispersants etc. Fire side treatment for: • FO & LDO fired boilers • Imported Coal and Lignite fired boilers • Agrowaste based ( briquette, bagasse, rise husk, wood etc) boilers
High Built-High beakdown voltage solvent free Epoxy Insulation coating